Selected Publications

Control of Manufacturing Systems

Joshi, S., Mettala, E.G., Smith, J.S., and Wysk, R.A., ``Formal Models for Control of Flexible Manufacturing Cells: Physical and System Model,'' IEEE Transactions on Robotics and Automation (to appear).

Ramaswamy, S.E. and Joshi, S., ``Deadlock Free Schedules for Automated Manufacturing Workstations," IEEE Transactions on Robotics and Automation (to appear).

Smith, J.S, Hoberecht, W.C. and Joshi, S., ``A Shop Floor Control Architecture for Computer Integrated Manufacturing," Journal of Design & Manufacturing (to appear).

Wysk, R.A., Yang, N. and Joshi, S., ``Resolution of Deadlocks in Flexible Manufacturing Systems: Avoidance and Recovery,'' Journal of Manufacturing Systems. , Vol. 13, No. 2, pp.128-138, 1994 .

Joshi, S., Mettala, E.G. and Wysk, R.A., ``CIMGEN A Computer Aided Software Engineering Tool for Development of CIM Software,'' IIE Transactions, vol. 24, no. 3, pp. 84-97, 1992.

Wysk, R.A., Yang, N. and Joshi, S., ``Detection of Deadlocks in Flexible Manufacturing Systems,'' IEEE Transactions on Robotics and Automation, vol. 7, no. 6, pp. 853-859, 1991.

Computer Aided Design & Process Planning

Tseng, Y-J. and Joshi, S., ``Recognizing Multiple Interpretations of Interacting Machining Features", Computer Aided Design, Vol. 26, No. 9, pp-667-688, 1994.

Joshi, S., Hoberecht, W.C., Lee, J., Wysk, R.A. and Barrick, D.C., ``Design, Development and Implementation of an Integrated Group Technology and Computer Aided Process Planning System,'' IIE Transactions , Vol. 26, No. 4, pp. 2-18, 1994.

Yannoulakis, N.J., Joshi, S. and Wysk, R.A, ``Quantitative Measures of Manufacturability for Rotational Parts,'' ASME Transactions on Engineering for Industry , vol. 116, no. 2, pp. 189-198, May 1994.

Joshi, S and Sudit, M., ``Procedures for Solving Single Pass Strip Layout Problems,'' IIE Transactions, vol. 26, no. 1, pp.27-37, 1994.

Brevick, J.R., Joshi, S., Davis, J.W. and Puskuri, S., ``Computer Aided Engineering of Tooling for Castings,'' Journal of Manufacturing Systems, vol. 11, no. 3, pp. 215-223, 1992.

Joshi, S. and Chang, T.C., ``Graph based Heuristics for Recognition of Machined Features from a 3D Solid Model,'' Computer Aided Design, vol. 20, no. 2, pp. 58-66, 1988.

Joshi, S., Vissa, N.N. and Chang, T.C., ``Expert Process Planning System with Solid Model Interface,'' International Journal of Production Research, vol. 26, no. 5, pp. 863-885, 1988.