Last Updated: 05 January, 2010
Dennis K.J. Lin
University
Distinguished Professor, Department of Statistics,
The Pennsylvania State University, 317 Thomas Building, University Park, PA
16802-2111
(814) 865-0377 (phone),
(814) 863-7114 (fax), DKL5@psu.edu (e-mail)
(This
list is sorted in ascending date order. For a list in descending order, please
click here.)
A.
Refereed
Papers:
1990-1992
(1)
Draper, N.R. and Lin, Dennis K.J.
(1990) “Small
Response
Surface Designs,” Technometrics, 32,
187-194.
(2)
Draper, N.R. and Lin, Dennis K.J.
(1990) “Connections Between Two-level Designs of Resolution III* and V,” Technometrics, 32, 283-288.
(3)
Draper, N.R. and Lin, Dennis K.J. (1990)
“Capacity Considerations for Two-level Fractional Factorial Designs,” Journal of Statistical Planning and
Inference, 24, 25-35.
(4)
Chen, J.H. and Lin, Dennis K.J. (1991) “On the
Identity Relationships of 2k-p Designs,” Journal of Statistical Planning and Inference, 28, 95-98.
(5)
Lin, Dennis K.J. and Draper, N.R.
(1992) “Projection Properties of Plackett and Burman Designs,” Technometrics, 34, 423-428.
1993
(6)
Lin, Dennis K.J. (1993) “A New Class
of Supersaturated Designs,” Technometrics,
35, 28-31.
(7)
Lin, Dennis K.J. (1993) “Another Look
at First-order Saturated Designs: the p-efficient Designs,” Technometrics, 35, 284-292. (Correction on Technometrics, 37-4, 473 )
(8)
Lin, Dennis K.J. and Draper, N.R. (1993)
“Generating Alias Relationships For Two-level Plackett and Burman Designs,” Computational Statistics and Data Analysis,
15, 147-157.
(9)
Lin, Dennis K.J. and Guttman, Irwin (1993)
“Handling Spuriosity in the Kalman Filter,” Statistics
and Probability Letters, 16,
259-268.
(10) Draper, N.R. and Lin,
Dennis K.J. (1993) “No Free Lunch: Comments on Silver (1991-1992),” Quality Engineering, 5(3), 369-373.
(11) Lin,
Dennis K.J., Usher, J.S. and Guess F.M. (1993) “Exact Maximum Likelihood Estimation
Using Masked System Data,” IEEE
Transactions on Reliability, 42,
631-635.
1994
(12) Lin, Dennis K.J.
(1994) “Making Full Use of Taguchi’s Orthogonal Arrays,” Quality and Reliability Engineering, International, 10,
117-121.
(13) Lin, Dennis K.J.
(1994) “Half Fraction Hadamard Matrix and Its Applications in Industry,” Journal of Chinese Statistical Association,
32, 305-320 (in Chinese).
(14) Lin, Dennis K.J. and
Guess, Frank M. (1994) “System Life Data Analysis with Dependent Partial
Knowledge On the Exact Cause of System Failure,” Microelectronics and Reliability, 34, 535-544.
1995
(15) Lin,
Dennis K.J. (1995) “Generating Systematic Supersaturated Designs,” Technometrics, 37, 213-225.
(16) Lin, Dennis K.J.
and Tu, Wanzhu (1995) “Dual Response Surface Optimization,” Journal of Quality Technology, 27, 34-39.
(17) Lin, Dennis
K.J. and Draper, N.R. (1995) “Screening Properties of Certain Two-Level
Designs,” Metrika, 42, 99-118.
(18) Guttman, Irwin and
Lin, Dennis K.J. (1995) “Robust Recursive Estimation for Correlated
Observations,” Statistics and Probability
Letters, 23, 79-92.
(19) Reiser, B.,
Guttman, Irwin, Lin, Dennis K.J., Guess, Frank M. and Usher, John S. (1995)
“Bayesian Inference for Masked System Life Time Data,” Journal of Royal Statistical Society, Ser. C (Applied Statistics), 44, 79-90.
(20) Wang, Y.J., Lin,
Dennis K.J. and Fang, K.T. (1995) “Designing Outer Array Points,” Journal of Quality Technology, 27, 226-241.
(21) Draper, N.R.
and Lin, Dennis K.J. (1995) “Characterizing Projected Designs: Repeat and
Mirror-Image Runs,” Communications in
Statistics, 24, 775-795.
(22) Lin, Dennis K.J.
(1995) “Identifying Defining Contrasts for 2k-p Designs,” Journal of Chinese Statistical Association,
33, 437-444 (in Chinese).
(23) Guttman, Irwin,
Lin, Dennis K.J., Reiser, B. and Usher, J.S. (1995) “Dependent Masking and
System Life Data Analysis,” Lifetime Data
Analysis, 1, 87-100.
(24) Lin,
Dennis K.J. (1995). Letter to Editor, Technometrics,
37, pp. 359-360.
1996
(25) Deng, L.Y., Lin,
Dennis K.J. and Wang, J.N. (1996) “A Measurement of Multi-factor
Orthogonality,” Statistics and
Probability Letters, 28,
203-209.
(26) Lin,
Dennis K.J., Usher, J.S. and Guess, F.M. (1996) “Bayesian Estimation of
Component-Reliability from Masked System-Life Data,” IEEE Transactions on Reliability, 45, 233-237.
(27) Deng, L.Y.,
Lin, Dennis K.J. and Wang, J.N. (1996) “Marginally Over Saturated Designs,”
special issue of Communications in
Statistics, Theory and Methods from the IMS Central Regional Meeting
honoring Bob Hogg’s 70th Birthday, 25(11), 2557-2573.
(28) Draper,
N.R. and Lin, Dennis K.J. (1996) “Response Surface Designs,” Chapter 11 in Handbook of Statistics, Volume 13, ed.
Subir Ghosh and C.R. Rao, pp. 323-375, North Holland: New York.
1997
(29) Deng, L.Y.,
Lin, Dennis K.J., Wang, J.N. and Yuan, Y. (1997) “Statistical Justification to
the Combination Generators” Statistica
Sinica, 7, 993-1003.
(30) Hale-Bennett,
Cynthia and Lin, Dennis K.J. (1997) “From SPC to DOE: A Case Study at Meco
Inc.,” Quality Engineering, 9(3), 489-502.
(31) Yamada, Shu and
Lin, Dennis K.J. (1997) “Supersaturated Designs Including Orthogonal Base,” Canadian Journal of Statistics, 25, 203-213.
(32) Lin, Dennis K.J.
and Lam, Amy (1997) “Connections Between Venn Diagram and Two-Level Factorial
Designs,” The American Statistician, 51, 49-51.
(33) Edgeman, Rick L
and Lin, Dennis K.J. (1997) “Sequential Analysis of an Accelerated Life Model,”
International Journal of Quality &
Reliability Management, 14,
598-605.
1998
(34) Westfall,
Peter H., Young, S. Stanley and Lin, Dennis K.J. (1998) “Forward Selection
Error Control in the Analysis of Supersaturated Designs,” Statistica Sinica, 8,
101-117.
(35) Chen, J.H. and
Lin, Dennis K.J. (1998) “On Identifiability of Supersaturated Designs,” Journal of Statistical Planning and
Inference, 72, 99-107.
(36) Kim, Kwang-Jae and
Lin, Dennis K.J. (1998) “Optimizing Dual Response Systems,” Journal of Quality Technology, 30, 1-10.
(37) Balkin, Sandy
D. and Lin, Dennis K.J. (1998) “Graphical Comparisons for Supersaturated
Designs,” Communications in Statistics,
27(6), 1289-1303.
(38) Lin, Dennis K.J.
(1998) “Spotlight Interaction Effects in ‘Main-Effect’ Plans: A Supersaturated
Design Approach,” Quality Engineering,
11(1), 133-139.
(39) Chao, Minte and
Lin, Dennis K.J. (1998) “A Journey to the Cp Index,” Quality
Control Monthly, 4, 61-65 (in Chinese).
(40) Chen, Y.S. and
Lin, Dennis K.J. (1998) “An Efficient Algorithm For Constructing One-at-A-Time
2k Plans,” Journal of Chinese
Statistical Association, 36,
361-376 (in Chinese).
(41) Deng, L.Y. and
Lin, Dennis K.J. (1998) “A Note on Morris’ Bound for Search Designs,” Journal of Statistical Planning and
Inference, 74, 203-204.
(42) Batcher,
Mary, Cecco, Kevin and Lin, Dennis K.J. (1998)
“Automating a Manual Telephone Process,” Chapter in Statistical Case Studies, ed. Roxy Peck, L.D. Haugh and A. Goodman,
SIAM: Philadelphia, Chapter 3, pp. 25-35.
(43) Lin,
Dennis K.J. (1998). Book Review of a
set of three response surface book: Empirical
Model Building And Response Surface by Box and Draper (1987); Response Surface Methodology by Myers
and Montgomery (1995); and Response
Surfaces by Khuri and Cornell (1996),
Journal of American Statistical Association, 93, pp. 401-402.
1999
(44) Deng, L.Y.,
Lin, Dennis K.J. and Wang, J.N. (1999) “On Resolution Rank Criterion for
Supersaturated Design,” Statistica
Sinica, 9, 605-610.
(45) Ma, M.C. and Lin,
D.K.J. (1999) “MaxMin MID Latin Hypercube,” Journal
of Chinese Statistical Association, 37,
53-77 (in Chinese).
(46) Yamada, Shu and
Lin, Dennis K.J. (1999) “Three-Level Supersaturated Design,” Statistics and Probability Letters, 45, 31-39.
(47) Lin,
Dennis K.J. (1999) “Supersaturated Designs,” entry in Encyclopedia of Statistical Science, ed. Samuel Kotz, John Wiley
& Sons: New York, pp. 727-731 (1999).
(48) Lin,
Dennis K.J. (1999). Discussion on papers
by Box and Liu, Box, and Myers, Journal
of Quality Technology, 31,
61-66.
2000
(49) Fang,
K.T., Lin, D.K.J., Winker, Peter and Zhang, Y (2000) “Uniform Design: Theory
and Application,” Technometrics, 42,
237-248.
(50) Kim, Kwang-Jae
and Lin, Dennis K.J. (2000) “Simultaneous Optimization of Mechanical Properties
of Steel by Maximizing Exponential Desirability Functions,” Journal of Royal Statistical Society, Ser. C
(Applied Statistics), 49, 311-325.
(51) Fang, K.T., Lin,
Dennis K.J. and Ma, C.X. (2000) “On the Construction of Multi-Level Supersaturated
Designs,” Journal of Statistical Planning
and Inference, 86, 239-252.
(52) Deng, L.Y. and
Lin, Dennis K.J. (2000) “Random Number Generation for The New Century,” The American Statisticians, 54,
145-150.
(53) Balkin, Sandy
D. and Lin, Dennis K.J. (2000) “A Neural Network Approach to Response Surface
Methodology,” a special issue of Response Surface Methodology and Related
Topics of Communications in Statistics,
ed. Norman R. Draper and Philip Prescott, 29,
270-281.
(54) Fang, K.T. and
Lin, Dennis K.J. (2000) “Theory and Applications of the Uniform Design,” Journal
of Chinese Statistical Association, 38(4), 331-351 (in
Chinese).
(55) Chatterjee,
K., Deng, L.Y. and Lin, Dennis K.J. (2000) “Two-Level Fractional Factorial
Design of Resolution V.2,” a special issue of ICSA Applied Statistics Symposium
of Communications in Statistics, 29, 1143-1154.
(56) Lin, Dennis K.J.
(2000) “Supersaturated Design: Theory and Application,” Chapter 18 in Statistical Process Monitoring and
Optimization, ed. Sung H. Park and G.G. Vining, Marcel Dekker pp. 305-319.
2001
(57) McGrath,
Richard N. and Dennis K.J. Lin, (2001) “Testing Multiple Dispersion Effects in
Unreplicated Fractional Factorial Designs,” Technometrics,
43, 406-414.
(58) Balkin, Sandy D.
and Dennis K.J. Lin, (2001) “Performance of Sensitizing Rules on Shewhart
Control Charts with Correlated Observations,” International Journal of Reliability Quality & Safety
Engineering, 8, 159-171.
(59) McGrath, Richard N.
and Lin, Dennis K.J. (2001) “Confounding of Location and Dispersion Effects in
Unreplicated Fractional Factorials,” Journal
of Quality Technology, 33, 129-139.
(60) Lin, D.K.J.
and Chang, J.Y. (2001) “A Note on Cyclic Orthogonal Designs,” Statistica Sinica, 11, 549-552.
(61) Ma, C.X.,
Fang, K.T. and Lin, Dennis.K.J. (2001) “On Isomorphism of Fractional Factorial
Designs,” Journal of Complexity, 17,
86-97.
(62) Chatterjee,
K., Deng, Lih-Yuan and Lin, Dennis K.J. (2001) “Two-Level Search Design for
Main-Effect Plus Two Plan,” Metrika, 54,
233-245.
(63) Chang, F.C.,
Huang Lo, M.N., Lin, Dennis K.J. and Yang, H.C. (2001) “Optimal Designs for
Dual Response Polynomial Regression Models,” Journal of Statistical Planning and Inference, 93, 309-322.
(64) Lin,
Yen-Shung and Lin, Dennis K.J. (2001) “Recent Development on Statistical
Inference for Massive Datasets,” Special Issue on Data Mining, Journal of
Statistics, National Cheng-Kung University, 24, 85-99 (in Chinese).
(65) Simpson, Timothy
W., Lin, Dennis K.J., and Chen, W. (2001) “Sampling Strategies for Computer
Experiments: Design and Analysis,” International Journal of Reliability and Application, 2(3), 209-240.
2002
(66) Beattie,
Scott D., Fong, Duncan K.H. and Lin, Dennis K.J. (2002) “A Two-Stage Model
Selection Strategy for Supersaturated Designs,” Technometrics, 44,
55-63.
(67) McGrath, R.N. and
Lin, Dennis K.J. (2002), “A Nonparametric Dispersion Test for Unreplicated
Two-Level Fractional Factorial Designs,” The
Journal of Nonparametric Statistics, 14(6),
699-714.
(68) Li, R.Z. and Lin,
Dennis K.J. (2002) “Data Analysis in
Supersaturated Design,” Statistics and Probability Letters, 59, 135-144.
(69) Yamada, Shu
and Lin, Dennis K.J. (2002),
“Construction of Mixed-Level Supersaturated Designs,” Metrika, 56, 205-214.
(70) Yeh, Arthur B.
and Lin, Dennis K.J. (2002), “A New Variable Control Chart for Multivariate
Processes,” International Journal
of Reliability Quality & Safety Engineering, 9, 41-59.
(71) Chan, L.Y.,
Dennis K.J. Lin, M. Xie and T.N. Goh, (2002) “Cumulative Probability Control Charts for Geometric and
Exponential Random Variables,” International
Journal of Production Research, 40, 133-150.
(72) Shia,
B.C., Lin, Dennis K.J. and Sheng, H.F. (2002) “Study on Consumer Indexes,” Taiwan
Outlook, 1, 266-268 (in Chinese).
(73) Yeh, Arthur B.,
Chen, Yun-Shiow and Lin, Dennis K.J. (2002) “The Box-chart: A New Variable
Control Chart,” Journal Chinese
Sttaistical Association, 40,
147-166 (in Chinese).
(74) Lin, Dennis K.J.
(2002) “Recent Advances in Designing Industrial Experimentations,” Calcutta Statistical Association Bulletin,
52, Nos. 205-108, pp. 47-69.
(75) Lin, Dennis
K.J. (2002). “Dennis’ Column” in China Statistics, special invited
articles:
Statistical
Data Mining in Taiwan (July issue);
Words and
Numbers
(August issue);
Statistical
Thinking: Old and New (September issue);
Lost in
Massive Datasets (October issue);
From Titanic
Data to Statistical Report (November issue);
The Next
Generation & Statistics (December issue).
2003
(76) Liechty, J.,
Lin, Dennis K.J., and Mcdermott, J. (2003), “Single-Pass Low-Storage Arbitrary
Quantile Estimation for Massive Datasets,” Statistics & Computing, 13, 91-100.
(77) Li,
W.W., Ye, Kenny and Lin, Dennis K.J. (2003), “Optimal Foldover Plans for Non-Regular Orthogonal Designs,” Technometrics,
45, 347-351.
(78) Li, W.W.
and Lin, Dennis K.J. (2003), “Optimal Foldover Two-Level Fractional Factorial
Designs,” Technometrics, 45,
142-149.
(79) McGrath, Richard
N. and Lin, Dennis K.J. (2003) “Analysis of Location and Dispersion Effects in
Unreplicated Fractional Factorial Designs,” Statistics
and Probability Letters, 65,
369-377.
(80) Stavrulaki,
Euthemia, Fong, Duncan K.H. and Lin, Dennis K.J. (2003), “Two-Resources
Stochastic Capacity Planning Incorporating Prior Information,” Journal of the Operation Research Society,
54(11), 1198-1208.
(81) Fang, K.T., Lin,
Dennis K.J. and Qin, Hong (2003), “A Note on Optimal Foldover Design,” Statistics and Probability Letters, 62, 245-250.
(82) Ma, Mi-Chia, Su,
Pei-Fang, and Lin, Dennis K.J. (2003), “Mining the Descriptive Statistics of a
Large Data Bases,” Journal of Chinese Statistical Association, 41,
97-116 (in Chinese).
(83) Fang, K.T.,
Lin, Dennis K.J., and Liu, M.Q. (2003), “Optimal Mixed-Level Supersaturated
Designs and Computer Experiment,” Metrika, 58, 279-291.
(84) Yeh, A.B.,
Lin, Dennis K.J., Zhou, Honghong, and Venkataramani, C. (2003), “A
Multivariate Exponentially Weighted Moving Average Control Chart for Monitoring
Process Variability,” Journal of Applied
Statistics, 30, 507-536.
(85) Chen, J.H., Lin,
Dennis K.J., and Thomas, D. (2003), “On the single item fill rate for a finite
horizon,” Operation Research Letters, 31, 119-123.
(86) Ma, C.X., Fang,
K.T. and Lin, Dennis K.J. (2003), “A Note on Uniformity and Orthogonality,” Journal of Statistical Planning and
Inference, 113, 323-334.
(87) Aggarwal, M.L.,
Budhraja, V. and Lin, Dennis K.J. (2003), “A New Class of Orthogonal Array and
Its Application,” IAPQR Transaction, 28, 23-32.
(88) Zen, M.M., Lin,
Y.H. and Lin, Dennis K.J. (2003) “Regression
Analysis for Large Datasets,” Journal of
Chinese Statistical Association, 41,
401-420 (in Chinese).
(89) Li, Runze and
Lin, Dennis K.J. (2003), “Analysis Methods for Supersaturated Design: Some
Comparisons,” Journal of Data Science,
1, 103-121.
(90) Lin, Dennis
K.J. (2003) “Industrial Experimentation for Screening,” Handbook of Statistics in Industry, Chapter 2, pp.33-73, Volume 22,
ed. C.R. Rao and R. Khattree, North Holland: New York.
(91) Fang, K.T.
and Lin, Dennis K.J. (2003) “Uniform Experimental Design and Its Applications
in Industry,” Handbook of Statistics in
Industry, Chapter 4, pp. 131-170, Volume 22, ed. C.R. Rao and R.
Khattree, North Holland: New York.
2004
(92) Ding, R.,
Lin, Dennis K.J., and Wei, D. (2004) “Dual Response Surface Optimization: A
Weighted MSE Approach,” Quality Engineering, 16, 377-385.
(93) Tang, M.,
Li, J., Chan, L.Y. and Lin, Dennis K.J. (2004) “Application of Uniform Design
to the Design of Cement Mixture,” Quality Engineering, 16,
461-474.
(94) Beattie,
Scoot D. and Lin, Dennis K.J. (2004), “Rotated Factorial Designs for Computer
Experiments,” Journal of Chinese
Statistical Association, 42, 289-308.
(95) Li, Runze, Lin,
Dennis K.J. and Chen, Y. (2004), “Uniform Design: Design, Analysis and Its
Application,” International Journal of
Materials and Product Technology, 20,
101-114.
(96) Xu, K., Lin,
Dennis K.J., Tang, L.C. and Xie, M. (2004) “Multiresponse Systems Optimization
Using the Goal Attainment Approach,” IIE Transaction, Quality and
Reliability Engineering, 36, 433-445.
(97) Yeh, A.B., Lin,
Dennis K.J. and Venkataramani, C. (2004), “Unified CUSUM Charts for Monitoring
Process Mean and Variability,” Quality
Technology & Quality Management, 1, 65-85.
(98) Ma, Heather and
Lin, Dennis K.J. (2004), “Effects of Simpson’s Paradox in Market Basket
Analysis,” Journal of Chinese Statistical
Association, 42, 209-221.
2005
(99) Ding,
R., Lin, Dennis K.J., Peterson, J.J.
(2005), “Large Sample
Confidence Band for Ridge Path
of Muti-response Surfaces,” Quality
& Reliability Engineering, International, 21, 669-675.
(100) Fu, Hwai-Hui, Lin,
Dennis K.J. and Bai, F.S., Tsai, H.T. and Wei, D. (2005) “Sensitivity Analysis on Damping Factor in Google
PageRank,” Journal of Chinese Statistical
Association, 43, 145-164 (in Chinese).
(101) Beattie, Scott
D. and Lin, Dennis K.J. (2005) “A New Class of Latin Hypercube for Computer
Experiments,” Contemporary Multivariate Analysis and Experimental Designs—In
Celebration of Professor Kai-Tai Fang’s 65th birthday, pp. 205-226, ed. Jianqing Fan and
Gang Li, The World Scientific Publisher.
2006
(102) Steinberg,
David M. and Lin, Dennis K.J. (2006)
“A Construction Method for Orthogonal Latin Hypercube Designs,” Biometrika, 93(2), 279 - 288.
(Amendments
and Corrections on P.1025)
(103) Cheng, K.F.,
Chu, C.K. and Lin, Dennis K.J. (2006) “Quick Multivariate Kernel Density
Estimation for Massive Datasets”, Applied
Stochastic Models in Business and Industry, 22, 533-546.
(104) Fu, Hwai-Hui,
Lin, Dennis K.J. and Tsai, H.T. (2006) “Damping Factor in Google Page Rank”, Applied Stochastic Models in Business and
Industry, 22, 431-444.
(105) Yeh, A.B., Lin,
Dennis K.J., and McGrath, R.N. (2006) “Multivariate Control Charts for
Monitoring Covariance Matrix: A Review,” International
Journal of Quality Technology and Quality Management, 3(4), 415-436.
(106) Yamada, Shu, Lin,
Dennis K.J., Matsui, Michiyo, Matsui, Tomomi, and Takenori Takahashi (2006) “A General Construction
Method for Mixed-Level Supersaturated Design,” Computational Statistics and
Data Analysis, 50(1), 254-265.
(107) Kim,
K.J. and Lin, Dennis K.J. (2006)
“Optimization of Multiple Responses Considering Both Location and Dispersion
Effects,” European Journal of Operation Research, 169,
133-145.
(108) Chao,
M.T. and Lin, Dennis K.J. (2006), “Another Look at the Process Capability
Index,” Quality and Reliability
Engineering, International, 22,
153-163.
(109) Lin, Dennis K.J. and
RFID Study Group at Pennsylvania State University (2006) “Challenges in RFID
Enabled Supply Chain Management,” Quality Progress, 39(11), 23-28.
(110) Lin, Dennis
K.J. and Peterson, J.J. (2006), “Statistical
Inference for Response Surface Optima,” Chapter 4 in Response Surface Methodology and Related Topics, ed. Andre I.
Khuri, pp.63-88, World
Scientific: Washington DC.
(111) Lin,
Dennis K.J. (2006). Book Review on Statistics for
Experimenters: Design, Innovation, and Discovery (Second Edition) By George E.P. Box, J. Stuart Hunter and William G. Hunter,
Journal of Quality Technology, 38,
78-80.
(112) Lin, Dennis
K.J. (2006), “Editorials”, Applied
Stochastic Models in Business and Industry, 22, 397-400.
2007
(113) Mcdermott, J.
and Lin, Dennis K.J. (2007) “Quantile
Contours and Multivariate Density Estimation for Massive Datasets via
Sequential Convex Hull Peeling,” IIE Transactions in Quality and Reliability,
39, 581-591.
(114) Huang, C.M.,
Lee, Y.J., Lin, Dennis K.J., and Huang, S.Y. (2007) “Model Selection for
Support Vector Machines Via Uniform Design”, Computational Statistics & Data Analysis, 52, 335-346.
(115) Mcdermott, J.,
Babu, G.J., Liechty, J.C. and Lin, Dennis K.J. (2007) “Data
Skeletons: Simultaneous Estimation on Multiple Quantiles for Massive Streaming
Datasets with Applications to Density Estimation,” Journal of Statistics &
Computing, 17, 311-321.
(116) Yang, Zhenlin and
Lin, Dennis K.J. (2007) “Improved Common Shape Estimation for Weibull
Distributions,” Applied Stochastic Models
for Business and Industry, 23,
373-383.
2008
(117) Jones, B., Lin,
Dennis K.J., and Nachtsheim, C. (2008) “Bayesian D-optimal Supersaturated
Designs,” Journal of Statistical Planning
and Inference, 138, 86-92.
(118) Chatterjee, K.,
Sarkar, A., and Lin, Dennis K.J. (2008) “Supersaturated Designs with High Searching
Probability,” Journal of Statistical
Planning and Inference, 138, 272-277.
(119) Lin, Dennis K.J. and
Wadhwa, Vijay (2008) “Efficiency Gets a New Identity: Barcode and RFID in the
Supply Chain,” Quality Progress, 41, 20-24.
(120) Deng, L.Y.,
Guo, R., Lin, Dennis K.J., and Bai, F.S. (2008) “Improving Random Number
Generators in the Monte Carlo Simulations Via Twisting and Combining,” Computer Physics Communications, 178, 401-408.
(121) Ai, M.Y.,
Hickernell, F.J., and Lin, Dennis K.J. (2008) “Optimal Foldover Plans for
Regular S-level Fractional Factorial Designs,” Statistics and Probability Letters, 78, 896-903.
(122) Coetzer, R.L.J.,
Rossouw, R.F., and Lin, Dennis K.J. (2008) “Dual Response Surface Optimization
with Hard-to-control Variables for Sustainable Gasifier Performance,” Applied Statistics, 57, 567-587.
(123) Acharya,
Navin N. and Lin, Dennis K.J. (2008) “Understanding a ZnO Nanorods Fabrication Process:
a Supersaturated Design Approach,” International
Journal of Nanomanufacturing, 2, 319-330.
(124) Wadhwa,
Vijay and Lin, Dennis K.J. (2008) “Radio Frequency Identification: A New
Opportunity for Data Science,” Journal of Data Science, 6, 369-388.
(125) Lin,
Dennis K.J. (2008) “Statistics and Its Application in Drunk Driver Detection,” China Statistics (in Chinese).
(126) Fang,
K.T. and Lin, Dennis K.J. (2008) “Uniform Design in Computer and Physical
Experiments,” The Grammar of Technology Development, ed. Shu Yamada,
pp.105-125.
(127) Chen,
R.B., Tsai, Y.J., and Lin, Dennis K.J. (2008) “Conditionally Optimal Small
Composite Designs,” Statistics and
Applications, 6, 29-48.
2009
(128) Sun, Fasheng,
Liu, Min-Quan, and Lin, Dennis K.J. (2009) “Construction of Orthogonal Latin
Hypercube Designes,” Biometrika, 96, 971-974.
(129) Liu,
Min-Qian and Lin, Dennis K.J. (2009) “Construction of Optimal Mixed-Level
Supersaturated Designs,” Statistica
Sinica, 19, 197-211.
(130) Bi,
Henry H. and Lin, Dennis K.J. (2009) “RFID-Enabled Discovery of Supply
Networks,” IEEE Transactions on
Engineering Management, 56,
129-141.
(131) Huang,
Zan and Lin, Dennis K.J. (2009) “The Time-Series Link Prediction Problem with
Applications in Communication Surveillance,” INFORMS Journal on Computing, 21,
286-303.
(132) Fu,
H.H., Lin, Dennis K. J., Tsai, H.T., Wei, D. (2009) “Applying Lot-by-lot Double
Sampling Plan to Reform Taiwan National Health Insurance Auditing System,” Quality & Quantity, 43, 571-584.
(133) Pang, F., Liu, M.Q. and Lin, Dennis K.J.
(2009) “A Construction Method for Orthogonal Latin Hypercube Designs With Prime
Power Levels,” Statistica Sinica, 19, 1721-1728.
(134) Sarkar,
Angshuman, Lin, Dennis K.J., and Chatterjee Kashinath (2009) “Probability of
correct model identification in supersaturated design,” Statistics and Probability Letters, 79, 1224-1230.
(135) Yang,
Su-Fen, Lin, Dennis K.J., and Hung, Tzu-Chen (2009) “Improvement inconsistency
of the metallic film thickness of computer connectors,” Journal of Process Control, 19,
498-505.
(136) Peterson,
J.J. and Lin, Dennis K.J. (2009) “Special Issues on Response Surface
Methodology (Editorial),” Quality
Technology and Quantitative Management, 6, 205-206.
(137) Lu, Xuan, Lin,
Dennis K.J.,, and Zhou, Daxin (2009) “On Construction of Two-stage Response
Surface Designs,” Quality Technology and
Quantitative Management, 6,
493-502.
(138) Li, Runze and Lin, Dennis, K.J. (2009) “Variable
Selection for Screening Experiments,” Quality
Technology and Quantitative Management, 6, 271-280.
(139) Lin,
Dennis K.J. (2009) “RFID: A technology to Change Statistical Thinking”, China Statistics, 1, 37-40 (in Chinese).
2010
(140) Zhu, Junjia and Lin,
Dennis K.J. (2010) “Monitoring the Slopes of Linear Profiles,” Quality Engineering, 22, 1-12.
(141) Li, Runze, Lin, Dennis K.J., and Li, Bing (2010) “Statistical Inference on
Large Data Sets,” Data & Knowledge
Engineering, forthcoming.
B.
Invited Papers in Conference Proceedings:
(1)
“Determining
the Relative Weights of Bias and Variance in Dual Response Surface
Optimization,” Proceedings of the Joint
Conference of Korean Institute of Industrial Engineers and Korean Operations
Research and Management Science Society, Jeonju, Korea (2004, with I.
Jeong, K.J. Kim and S. Chang).
(2)
“Recent Advances in Designing Industrial
Experimentation,” Proceedings of 4th Triennial Symposium
(2000, Calcutta, India; published in 2002).
(3)
“Recent Advances in Uniform Design,” Proceedings of the First
International India
Statistical Association Joint Statistical Meetings, pp. 275-280 (2000, Delhi, India).
(4)
“Location And Dispersion Effects Inference in
Unreplicated Fractional Factorial Designs,” Proceedings
of the Section on Physical & Engineering Sciences, American Statistical
Association, pp. 56-61 (1999, with Richard N. McGrath).
(5)
“Construction of Mixed-Level Supersaturated Designs,” Proceedings of the Section on Physical &
Engineering Sciences, American Statistical Association (1998, with Shu
Yamada).
(6)
“Simultaneous Optimization of Multiple Responses,” Proceedings of the 1998 Korean Institute of Industrial Engineers
Conference (1998, with K.J. Kim).
(7)
“Rotated Factorial Designs for Computer Experiments,” Proceedings of the Section on Physical &
Engineering Sciences, American Statistical Association (1997, with Scott D.
Beattie).
(8)
“Recent
Advances in Supersaturated Designs,” Proceedings
of the Section on Physical & Engineering Sciences, American Statistical
Association, pp. 1-7 (1996).
(9)
“Criteria
for Supersaturated Designs,” Proceedings
of the Section on Physical & Engineering Sciences, American Statistical
Association, pp.124-128 (1994, with L.Y. Deng).
(10) “Collaborative
Research: Pitfalls and Benefits for the Statisticians,” Proceedings of the Making Statistics More Effective in Schools of
Business Conference, Minneapolis, MN (1993).
(11) “Projection
Properties of the 12-Run Plackett and Burman Design,” Proceedings of the Section on Physical & Engineering Sciences,
American Statistical Association, pp. 33-38 (1992, with Norman Draper).
(12) “Censoring on the Cause of System Failure,” Proceedings of the Fourth International Research
Conference on Reliability, Columbia,
MO (1991, with Frank M. Guess).
C.
Lecture Notes for Presentations:
(1) BIG
Statistics (updated on 25-Oct., 2006).
(2) Computer
Experiments (updated on 23-Oct., 2006).
(3) Recent
Advances in Design of Experiment (updated on 02-Nov., 2006)
(4) Response
Surface Methodology: 50 Years Later (updated on 30-Nov., 2006)
(5) Statistical
Data Mining (updated on 21-Feb., 2006)
(6) Supersaturated
Design (updated on 08-Aug., 2006)
(7) Six-Sigma
in Asia (updated on 04-May, 2007)
(8) Opportunities
for Statistics (updated on 11-May, 2007)
(9) Recent
Advances on Computer Experiment (updated on 12-Feb, 2008)
(10) Process
Mining and RFID (updated on 16-Dec, 2008)
(11) Profile
Control Charts (updated on 08-Oct, 2009)