Dr. E. Amine Lehtihet, Ph.D.
Home / Contact Selected Publications Modular Tolerancing Courses
 

  S E L E C T E D   P U B L I C A T I O N S
  • Sample Publications in Tolerancing

    • Lehtihet, E.A., Gunasena, U.N., Models for the position and size tolerance of a single hole, ASME, P.E.D. vol. 29, pp.49-63, December 1988.

    • Lehtihet, E.A., Gunasena, U.N., Position tolerance of a single hole at RFS, SME Transactions/NAMRC XVII, pp.352-358, May 1989.

    • Lehtihet, E.A., Dindelli. B.A., TOLCON: Microcomputer-based module for simulation of tolerances, Manufacturing Review, vol. 2, No. 3, pp. 179-188, 1989.

    • Manivannan, S., Lehtihet, E.A., Egbelu, P.J., A knowledge-based system for specification of manufacturing tolerances, Journal of Manufacturing Systems, vol. 8, No. 2, pp. 153-160, 1989.

    • Irani, S.A., Mittal, R., Lehtihet, E.A., Tolerance chart optimization, International Journal of Production Research, vol. 27, No. 9, pp. 1531-1552, 1989.

    • Lehtihet, E.A., Gunasena, U.N., Statistical models for the relationship between production errors and the position tolerance of a hole, Annals of the CIRP, vol. 39/1/, pp. 569-572, 1990.

    • Mittal, R., Irani, S.A., Lehtihet, E.A., Tolerance control in the manufacture of discrete components, Journal of Manufacturing Systems, vol.9/No. 3, pp. 233-146, 1990.

    • Gunasena, U.N., Lehtihet, E.A., The verification of composite position tolerance, IIE Transactions Volume 23, Number 3, pp. 290 - 299, Sept. 91.

    • Lehtihet, E.A., Joshi, S., A framework for dynamic tolerance control in the manufacture of discrete parts, ASME, Advances in Integrated Product Design and Manufacturing, PED-Vol.47, pp. 65-80, 1990.

    • Lehtihet, E.A., Gunasena, U.N., On the composite position tolerance for patterns of holes, Annals of the CIRP, pp. 495-498 Vol. 40/1/1991.

    • Priebe, B.M., Lehtihet, E.A., Cavalier, T.M., Sequential Tolerance Control in Discrete Part Manufacturing, International Journal of Production Research, 1997, Vol. 35, No. 5, 1305-1319.

    • Wheeler, D.L., Cavalier, T.M., Lehtihet, E.A., An implicit enumeration approach to tolerance allocation in sequential tolerance control, IIE Transactions, Vol. 31 No 1, pp 75-84, 1999.

    • Fraticelli, B.M., Lehtihet, E.A., Cavalier, T.M., Tool wear effect compensation under sequential tolerance control, International Journal of Production Research, 1999, Vol. 37, No. 3, 639-651.

    • Wheeler, D.L., Cavalier, T.M., E.A. Lehtihet, An implicit Enumeration Approach to Probabilistic Tolerance Allocation under Conventional Tolerance Control, To Appear in International Journal of Production Research.

    • Lehtihet, E.A., Dewan, P., Ranade, S., A comparative evaluation of tolerance control chart models, To appear in International Journal of Production Research.

    • Cavalier, T.M., Lehtihet, E.A., Comparative evaluation of set point procedures in sequential tolerance control, To appear in International Journal of Production Research.

  • Sample Publications in Electronic Assembly Processes

    • Supinsky, M., Egbelu, P.J., Lehtihet, E.A., Automatic generation of robotic code for printed circuit board assembly, Manufacturing Review, vol.4, #3, pp. 214-224, September 1991.

    • Oyeleye, O.U., Lehtihet, E.A., Optimization of vapor phase reflow parameters during the manufacture of filter pin components, 2nd International Conference on Flexible Automation and Information Management, June/July 1992, Washington D.C.

    • Cheraghi, H.S, Lehtihet, E.A., Egbelu, P.J., A vision assisted lead to pad Matching Technique for Placement of Surface Mount Components, IIE Transactions (1995) 27, 473-482.

    • Cheraghi, S.H., Lehtihet, E.A., Egbelu, P.J., Design and characterization of a Vision Assisted System for Surface Mount Component Placement, IIE Transactions (1996) 28, 855-864.

    • Cheraghi, S.H., Egbelu, P.J., Lehtihet, E.A., Modelling and performance characterization of vision-assisted robotic cell for printed circuit board assembly, International Journal of Computer Integrated Manufacturing, 1995, Vol. 8, No. 5, 381-390.

    • Oyeleye, O.U., Lehtihet, E.A., A classification and optimal feature selection algorithms for automated solder joint defect inspection, Journal of Manufacturing Systems, Vol.17, No. 4, pp. 251-262, 1998.

    • Oyeleye, O.U., Lehtihet, E.A., Automatic visual inspection of solder joint defects, International Journal of Production Research, Vol. 37, no. 6, 1217-1242, 1999.



Penn State
This page has been accessed 3764 times since July 2, 1999.
This page was last modified: Tuesday, 26-Oct-1999 17:33:44 EDT.

site design by oxygenesis design / ian cavalier.