- Today we will be building the vertical stabilizer, the
rudder, the horizontal stabilizer, and the elevator.
- See page 5 of the plans
- You need to tape your drawing plans on your table,
and then tape wax paper on top of the plans.
- You will buld these directly on top of the plans (with the
wax paper protecting your plans)
- You will use THIN CA glue for the joints, and then reinforce
with THICK when you are done.
- You will probably have some time remaining, so you could
bend the landing gear (page 10) and the tail skid (page 12),
see your drawings
- You could also bend the thin piano wire as shown on page 15,
and on the drawings
- Make sure you put Check Marks next to tasks you have
finished in your plans
|