"Experimental Turbine Aero-Heat Transfer Studies in Rotating Research Facilities, Invited keynote paper, presented at TURBINE 2009 "Heat Transfer in Gas Turbine Systems" organized by ICHMT International Center for Heat and Mass Transfer, Proc. of the ICHMT TURBINE 2009, held in Antalya, Turkey, 9-14 August 2009.

"Axial Flow Fan Tip Leakage Flow Control Using Tip Platform Extensions, (with Akturk) accepted for publication in ASME Journal of Fluids Engineering, December 2009

"Channel Wing as a Potential VTOL/STOL Aero-Vehicle Concept , (with Gokce) Manuscript submitted to Recent Patents in Mechanical Engineering, Bentham Publishing House, UK, May 2009

"Convective Heat Transfer and Reference Free-stream Temperature Determination near the Casing of an Axial Flow Turbine , (with Gumusel) Manuscript submitted to ASME Journal of Heat Transfer, April, 2009

"Temperature and Heat Transfer Measurements in Aerospace Engineering, an invited section prepared for the Encyclopedia of Aerospace Engineering, Wiley, January 2009.

"PIV Measurements and Computational Study of a 5-Inch Ducted Fan for V/STOL UAV Applications, (with Akturk and Shavalikul) presented at the 47th AIAA Aerospace Sciences Meeting and Exhibit , AIAA paper 2009-332, 5-8 January 2009, Orlando, Florida

"PIV Measurements and Computational Study of a 5-Inch Ducted Fan for V/STOL UAV Applications, (with Akturk and Shavalikul) presented at the 47th AIAA Aerospace Sciences Meeting and Exhibit , AIAA paper 2009-332, 5-8 January 2009, Orlando, Florida

"Pressure Side Tip Platform Extensions for Tip Leakage Control in Axial Turbines, (with Shavalikul) submitted to Progress in Computational Fluid Dynamics Inderscience Publications, ISSN 1468-4349

"A Comparative Analysis of Pressure Side Extensions for Tip Leakage Control in Axial Turbines, (with Shavalikul) GT2008-50782 presented in 2008 ASME International Gas Turbine Conference, Berlin, Germany, 9-13 June 2008

"Development of a Tip Leakage Control Device for an Axial Flow Fan, (with Akturk) GT2008-50785 presented in 2008 ASME International Gas Turbine Conference, Berlin, Germany, 9-13 June 2008

"Computational Shape Design of a Radar Antenna Used for Airport Ground Traffic Control, (with Gumusel) in Progress in Computational Fluid Dynamics, Vol.10, No.1, 2010, pp: 32-39, Inderscience Publications, ISSN 1468-4349

"Pressure Resolution of a PSP Based Measurement System with Non-Linear Intensity Response, (with Dhall) presented at the 6th AIAA Aerospace Sciences Meeting and Exhibit, AIAA paper 2008-279, 7 - 10 January 2008, Reno, Nevada

"Tip-Leakage Vortex Minimization In Ducted Axial Fans Using Novel Pressure Side Tip Platform Extensions, (with Akturk) invited paper, 4. ANKARA International Aerospace Conference AIAC-2007-004, 10-12 September, 2007 - METU, Ankara.

"Determination of Casing Convective Heat Transfer Coefficient and Reference Temperature in the Tip Clearance Region of an Axial Flow Turbine, (with Gumusel) GT2007-27993 presented at the 2007 ASME International Gas Turbine Conference, Montreal, Canada, 14-17 May 2007

"Aerodynamic Character of Partial Squealer Tip Arrangements In An Axial Flow Turbine , Part I : Detailed Aerodynamic Field Modifications via Three Dimensional Viscous Flow Simulations Around Baseline Tip, (with Kavurmacioglu and Dey) "Progress in Computational Fluid Dynamics, Vol.7 , pp:363-373, July 2007

"Aerodynamic Character of Partial Squealer Tip Arrangements In An Axial Flow Turbine , Part II :: Detailed Numerical Aerodynamic Field Visualizations via Three Dimensional Viscous Flow Simulations Around a Partial Squealer Tip,, (with Kavurmacioglu and Dey) "Progress in Computational Fluid Dynamics, Vol.7 , pp:374-386, July 2007

"Pressure Sensitive Paint for Analysis of Film Cooling Effects on a Gas Turbine Blade Tip, (with Dhall and Humber)) Proceedings of the 14 th ISME, The International Conference on Mechanical Engineering in Knowledge Age, paper ref.335, Delhi College of Engineering, India, December 2005

"Influence of Casing Roughness on the Aerodynamic Structure of Tip Vortices in an Axial Flow Turbine, (with Rao, Kavurmacioglu and Gumusel) ASME paper GT2006-91011 presented at the ASME International Gas Turbine Congress to be held in Barcelona, Spain, May 8-11, 2006

"Aerodynamics of Tip Leakage Flows Near Partial Squealer Rims in an Axial Flow Turbine Stage, (with Kavurmacioglu and Dey) Trans.of the ASME Journal of Turbomachinery, Vol.127, January 2005, pp. 14-24 (In a special edition in memory of B.Lakshminarayana) , January 2005

"Aerodynamic Drag Characteristics and Shape Design of a Radar Antenna Used for Airport Ground Traffic Control, (with Gumusel and Kavurmacioglu) to be presented at the Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-11) to be held in Honolulu, HI, February 26 to March 2, 2006

"3D Tip Flow Characteristics and Vortex Shedding from a Radar Antenna used for Airport Ground Traffic Control, (with Gumusel and Kavurmacioglu) to be presented at the Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-11) to be held in Honolulu, HI, February 26 to March 2, 2006

"Flow around Helicopter Blade Tip Sections Using a 2d Particle Image Velocimeter-Part I (with Kahveci) to be presented at the Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-11) to be held in Honolulu, HI, February 26 to March 2, 2006.

"Flow Around Helicopter Blade Tip Sections Using A (3d) Stereoscopic Particle Image Velocimeter-Part II(with Kahveci) to be presented at the Eleventh International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-11) to be held in Honolulu, HI, February 26 to March 2, 2006.

"Visualization of Rotor Endwall, Tip Gap and Outer Casing Surface Flows in a Rotating Axial Turbine Rig, (with Rao), ASME paper GT2005-68264, presented at the ASME International Gas Turbine Congress held in Reno, Nevada, June 6-9, 2005.

"Heat Transfer, Pressure Loss and Flow Field Measurements Downstream of Staggered Two-Row Circular and Elliptical Pin Fin Arrays, (with Uzol), ASME Transactions, Journal of Heat Transfer, (An invited paper for a [Gas Turbine Heat Transfer] special edition edited by Prof. P.M.Ligrani, Associate Editor, Journal of Heat Transfer), Vol.127, Issue 5, pp. 458-471, May 2005.

"A Flow Visualization Study of Axial Turbine Tip De-sensitization by Coolant Injection from a Tip Trench, (with Rao), ASME paper IMECE2004-60943, presented at the 2004 ASME International Mechanical Engineering Congress and RD&D Expo, November 13-19, 2004, Anaheim, California, USA.

"Axial Turbine Tip De-sensitization by Injection from a Tip Trench, Part-1 : Effect of Injection Mass Flow Rate, (with Rao), ASME paper GT2004-53256, presented at the 2004 ASME International Gas Turbine Congress held in Wien, Austria, June 2004.

"Axial Turbine Tip De-sensitization by Injection from a Tip Trench, Part-2 : Leakage Flow Sensitivity to Injection Location, (with Rao), ASME paper GT2004-53258, presented at the 2004 ASME International Gas Turbine Congress held in Wien, Austria, June 2004.

---

von Karman Institute Lecture Series VKI-LS 2004-02

Turbine Blade Tip Design and Tip Clearance Treatment, 19-23 January 2004

"A Turbine Research Facility to Study Tip Desensitization Including Cooling Flows, von Karman Institute Lecture Series VKI-LS 2004-02 Turbine Blade Tip Design and Tip Clearance Treatment, 19-23 January 2004, pp. 1-26, ISBN 2-930389-51-6, Brussels.

"Tip Leakage Flow Simulation in AFTRF Blade Passages, (with Kavurmacioglu and Dey) von Karman Institute Lecture Series VKI-LS 2004-02 Turbine Blade Tip Design and Tip Clearance Treatment, 19-23 January 2004, pp. 27-41, ISBN 2-930389-51-6, Brussels.

"Tip Desensitization of an Axial Turbine Rotor Using Tip Platform Extensions, (with Dey) von Karman Institute Lecture Series VKI-LS 2004-02 Turbine Blade Tip Design and Tip Clearance Treatment, 19-23 January 2004, pp. 42-62, ISBN 2-930389-51-6, Brussels.

"Tip Desensitization of an Axial Turbine Rotor Using Partial Squealer Rims,(with Dey and Kavurmacioglu) ) von Karman Institute Lecture Series VKI-LS 2004-02 Turbine Blade Tip Design and Tip Clearance Treatment, 19-23 January 2004, pp. 63-84, ISBN 2-930389-51-6, Brussels.

"Simulation of Tip Leakage Flow around Partial Squealer Rims in Axial Turbines, (with Kavurmacioglu and Dey) von Karman Institute Lecture Series VKI-LS 2004-02 Turbine Blade Tip Design and Tip Clearance Treatment, 19-23 January 2004, pp. 85-101, ISBN 2-930389-51-6, Brussels.

"Injection From A Tip Trench as a Turbine Tip Desensitization Method, Part 1 : Effect of Injection Mass Flow Rate, (with Rao) von Karman Institute Lecture Series VKI-LS 2004-02 Turbine Blade Tip Design and Tip Clearance Treatment, 19-23 January 2004, pp. 102-121, ISBN 2-930389-51-6, Brussels.

"Injection From A Tip Trench as a Turbine Tip Desensitization Method, Part 2 : Leakage flow sensitivity to injection location, (with Rao) von Karman Institute Lecture Series VKI-LS 2004-02 Turbine Blade Tip Design and Tip Clearance Treatment, 19-23 January 2004, pp. 122-135, ISBN 2-930389-51-6, Brussels.

---

"Tip Leakage Flows near Partial Squealer Rims In an Axial Flow Turbine Stage, (with Dey and Kavurmacioglu) ASME paper GT2003-38979, presented at the 2003 ASME IGTI Gas Turbine Congress, Atlanta, Georgia, June 2003.

"A press release on the breakup of Space Shuttle Columbia ," (Interview with Philadelphia Inquirer on February 2, 2003)

"Tip Leakage Flows near Partial Squealer Rims in an Axial Flow Turbine Stage ," (with Dey and Kavurmacioglu) accepted for presentation in 2003 ASME IGTI Gas Turbine Congress to be held in Atlanta, Georgia, USA, June 2003 (also for Journal of Turbomachinery)

"Experimental and Computational Visualization and Frequency Measurements of the Jet Oscillation Inside a Fluidic Oscillator," (with Uzol) Journal of Visualization, Vol.888, No.8, pp. 88-88, August 2002

"Turbulent Flow and Heat Transfer Analysis in a 90 degree Turning Duct and Comparisons with Measured Data, Part 1 : Influence of Reynolds Number and Streamline Curvature on Viscous Flow Development," (with Kim and Wiedner) the International Journal of Rotating Machinery, VOL.8 , No.2, pp:109-123, March-April 2002.

"Turbulent Flow and Heat Transfer Analysis in a 90 degree Turning Duct and Comparisons with Measured Data, Part II : Influence of Secondary Flow, Vorticity, Turbulent Kinetic Energy and Thermal Boundary Conditions on Endwall Heat Transfer," (with Kim and Wiedner) the International Journal of Rotating Machinery, VOL.8 , No.2, pp:125-140, March-April 2002.

" Forced Convection Heat Transfer Enhancement Using a Self-oscillating Impinging Jet," (with Herr) ASME Journal of Heat Transfer, Vol.124 , No. 4 , pp. 221-232 , Augst 2002.

" Secondary Flow and Forced Convection Heat Transfer Near Endwall Boundary Layer Fences In A 90 degree Turning Duct" (with Rizzo) International Journal of Heat and Mass Transfer, Vol.231, No.4, pp.345-357, November 2001. (to appear in 2002)

" Aerodynamic Loss Characteristics of a Turbine Blade with Trailing Edge Coolant Ejection : Part-1 External Aerodynamics, Total Presssure Losses and Predictions," (with Uzol and Glezer), ASME Journal of Turbomachinery, Vol.123, No.2, pp.238-248, April 2001.

" Aerodynamic Loss Characteristics of a Turbine Blade with Trailing Edge Coolant Ejection : Part-2 Effect of Cut-back Length, Spanwise Rib Spacing, Chordwise Rib Length, on Discharge Coefficients" (with Uzol and Glezer), ASME Journal of Turbomachinery, Vol.123, No.2, pp.249-257, April 2001.

" Experimental and Computational Visualization and Frequency Measurements of the Jet Oscillation Inside a Fluidic Oscillator," (with Uzol) 4th International Symposium on Particle Image Velocimetry, PIV-01 Paper 1029, Gottingen, Germany, September 17-19, 2001.

"The Effect of Sample Size, Turbulence Intensity and Velocity Field on the Experimental Accuracy of Ensemble Averaged PIV Measurements," (with Uzol) 4th International Symposium on Particle Image Velocimetry, PIV-01 Paper 1096, Gottingen, Germany, September 17-19, 2001.

"Mainstream Aerodynamic Effects due to Wheel Space Coolant Injection in a High Pressure Turbine Stage, Part-1 Stationary Frame Measurements" (with McLean) ASME Journal of Turbomachinery, Vol.123, No.4, pp. 687-696, October 2001.

"Mainstream Aerodynamic Effects due to Wheel Space Coolant Injection in a High Pressure Turbine Stage, Part-2 Rotational Frame Measurements," (with McLean) ASME Journal of Turbomachinery, Vol.123, No.4, pp. 697-703, October 2001.

"Aerodynamic Tip Desensitization of an Axial Turbine Rotor Using Pressure Side Tip Platform Extensions" (with Dey) ASME paper presented at the 2001-GT-0484, ASME International Gas Turbine Conference, New Orleans, June 2001.

"Elliptical Pin Fin Arrays as an Alternative to Conventional Circular Pin Fin Arrays for Gas Turbine Blade Cooling Applications, Part-1 Wall Heat Transfer and Pressure Loss Characteristics" (with Uzol) ASME paper 2001-GT-0180 presented at the ASME International Gas Turbine Conference, New Orleans, June 2001.

"Elliptical Pin Fin Arrays as an Alternative to Conventional Circular Pin Fin Arrays for Gas Turbine Blade Cooling Applications, Part-2 Wake Flow Field Measurements and Visualization using Particle Image Velocimetry" (with Uzol) ASME paper 2001-GT-0181 presented at the, ASME International Gas Turbine Conference, New Orleans, June 2001.

"+Determination of Optimal Row Spacing for a Staggered Cross-Pin Array in a Turbine Blade Cooling Passage," (with Donahoo, Kulkarni and Belegundu) Journal of Enhanced Heat Transfer, Vol.8, pp:41-53, January 2001.

"+An Improved Transient Method for the Simultaneous Determination of Free-stream Reference Temperature and Convective Heat Transfer Coefficient: The "Invariant h Method" " presented at "Turbine-2000" organized by the ICHMT International Centre for Heat and Mass Transfer, held in Cesme, Turkey, August 2000.

"+Implementation of the "Invariant h" Method in Liquid Crystal Thermometry Based Heat Transfer Research Including Film Cooling" presented at "Turbine-2000" organized by the ICHMT International Centre for Heat and Mass Transfer, held in Cesme, Turkey, August 2000.

"Aerodynamic Loss Characteristics of a Turbine Blade with Trailing edge Coolant Ejection : Part-1 External Aerodynamics, Total Presssure Losses and Predictions," (with Uzol and Glezer), ASME 2000-GT-557, presented at the 2000 ASME International Gas Turbine Conference , Munich, Germany, June 2000.

"Aerodynamic Loss Characteristics of a Turbine Blade with Trailing edge Coolant Ejection : Part-2 Effect of Cut-back Length, Spanwise Rib Spacing, Chordwise Rib Length, on Discharge Coefficients" (with Uzol and Glezer), ASME 2000-GT-258, presented at the 2000 ASME International Gas Turbine Conference , Munich, Germany, June 2000.

"Development of Turbine Tip Clearance Flow Downstream of a Rotor Blade with Coolant Injection from a Tip Trench," (with Dey) Proceedings of the 8 th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-8), pp:572-579, March 2000.

"Analysis of Turbulent Flow and Endwall Heat Transfer in a 90 o Turning Duct and Comparisons with Measured Data, Part 1 : Influence of Reynolds Number and Streamline Curvature on Viscous Flow Development," (with Kim and Wiedner) Proceedings of the 8 th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-8), pp: 656-666, March 2000.

"Analysis of Turbulent Flow and Endwall Heat Transfer in a 90 o Turning Duct and Comparisons with Measured Data, Part 2 : Influence of Secondary Flow, Vorticity, Turbulent Kinetic Energy and Thermal Boundary Conditions on Endwall Heat Transfer," (with Kim and Wiedner) Proceedings of the 8 th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-8), pp: 643-655, March 2000.

"A Computational Visualization of Three Dimensional Flow and Heat Transfer over a Staggered Array of Pin Fins in a Turbine Coolant Passage " (with Donahoo, Kulkarni and Belegundu) ASME paper 99-GT-257 presented in 1999 ASME International Gas Turbine Conference, Indianapolis, Indiana, June 1999.

"+A Student Executed, Industrial Gas Turbine Design Project with an Industrial Deadline, " (with Miller, Glezer and Fox) ASME paper 99-GT-326 presented in 1999 ASME International Gas Turbine Conference, Indianapolis, Indiana, June 1999, an ASME paper submitted to ASME Journal of Turbomachinery.

"Oscillator Fin as a Novel Heat Transfer Augmentation Device for Gas Turbine Cooling Applications," (with Uzol), ASME paper 98-GT-150 presented at the 1998 ASME International Gas Turbine Conference, Stockholm, Sweden, June 1998.

"+Oscillator Fin as a Novel Heat Transfer Augmentation Device for Aerospace Cooling Applications," (with Uzol) Invited paper presented at the 1998 Ankara International Aerospace Conference, September 9-11,1998, Turkey, Proceedings of the 2nd Ankara Int. Aerospace Conference, pp.70-81.

"Optimization of Staggered Pin Fin Arrays for Gas Turbine Cooling Applications," (with Donahoo, Kulkarni and Belegundu) ASME paper 98-GT-149, presented at the 1998 ASME International Gas Turbine Conference, Stockholm, Sweden, June 1998.

"Application of Thermochromic Liquid Crystal to Rotating Surfaces," (with Glezer, Owen, Pilbrow and Syson) ASME Journal of Turbomachinery, Vol.120, Number 1, January 1998.

"Liquid Crystal Thermography on the Fluid Solid Interface of Rotating Systems," (with Glezer) ASME, Journal of Heat Transfer, Vol.119, No.1, pp:20:29, February 1997.

"Heat Transfer Near the Trailing Edge of a Cooled Turbine Blade with Special Emphasis Given to Pressure Side Cut-back Length," (with Iyer) Proceedings of the 3rd ASME-ISHMT Heat and Mass Transfer Conference, pp:829-835, Kanpur, India, (Narosa Publishing House), December 1997.

"Self-Oscillating-Impinging-Jet as a Gas Turbine Cooling Enhancement System," (with Herr) ASME paper 97-GT-330 presented at the 42nd ASME Int. Gas Turbine Conference, Orlando, FL, June 1997.

"Determination of Optimal Row Spacing for a Staggered Pin Fin Array in a Turbine Blade Cooling Passage," (with Donahoo, Kulkarni and Belegundu) Proceedings of the 3rd ASME-ISHMT Heat and Mass Transfer Conference, pp:837-843, Kanpur, India, (Narosa Publishing House), December 1997.

"Passage Flow Structure and Its Influence on Endwall Heat Transfer in a 90 o Turning Duct : Mean Flow and High Resolution Endwall Heat Transfer Experiments," (with Wiedner) ASME Journal of Turbomachinery, Vol.119, No.1, pp:39-50, January 1997.

"An Aero-thermal Investigation of Boundary Layer Fences for use in Turbine Endwall Regions and Internal Coolant Passages," (with Rizzo), a paper presented at the Propulsion Symposium organized by the Ohio Aerospace Institute, October 1997.

"Determination of Convective Heat Flux on State Heat Transfer Surfaces with Arbitrarily Specified Boundaries," (with Wiedner), ASME Journal of Heat Transfer, Vol.118, No.4, pp:1-8, November 1996.

"Design and Development of a Turbine Research Facility to Study Rotor-Stator Interaction Effects," (with Lakshminarayana, Halliwell, Zaccaria) International Journal of Turbo and Jet Engines, Vol. 13, pp. 155-172, 1996. (Co-author)

"Application of Thermochromic Liquid Crystal to Rotating Surfaces," (with Glezer, Owen, Pilbrow and Syson) 1996 ASME International Gas Turbine Conference, Birmingham, UK, ASME paper ASME-96-GT-138, June 1996.

"Passage Flow Structure and Its Influence on Endwall Heat Transfer in a 90 degree Turning Duct : Turbulent Stresses and Turbulent Kinetic Energy Production," (with Wiedner) ASME paper 96-GT-251, 1996 ASME International Gas Turbine Conference, Birmingham, UK.

"Color Response Modification of Encapsulated Liquid Crystals Used in Rotating Disk Heat Transfer Studies," (with Glezer) ASME paper 95-GT-439, 1995 ASME International Gas Turbine Conference, Houston, Texas, June 1995.

"Analysis and Quantification of a Solid State Laser Doppler Anemometer," (with McLean) AIAA Journal, Vol. 33, No. 10, 1995, pp. 1880-1887.

"Application of a Heat Flux/Calorimeter Based Method to Assess the Effect of Turbulence on Turbine Airfoil Heat Transfer," (with Glezer, Moon and Zhang) ASME paper 94-GT-95, 39th ASME International Gas Turbine and Aeroengine Congress held in, The Hague, the Netherlands, June 1994.

"Liquid Crystal Thermography on the Rotating Surfaces of Turbomachinery Systems," a book chapter in "Advanced Turbomachinery Design," edited by: Chunill Hah, published by Marcel Dekker Inc., N.Y. 10016.

"Analysis and Design of a Trailing Edge Cooling System," (with Yavuzkurt) A final research report submitted to Pratt&Whitney GESP,West Palm Beach, Florida, November 1995.

"Airfoil Trailing Edge Cooling Systems," (with Yavuzkurt) A research report submitted to Pratt&Whitney GESP,West Palm Beach, Florida, August 1995.

"Fluid Dynamics and Convective Heat Transfer in Impinging Jets Through Implementation of A High Resolution Liquid Crystal Technique, Part I , Flow and Heat Transfer Experiments," (with Kim) International Journal of Turbo&Jet Engines, Vol.12, pp. 1-12, June 1995.

"Fluid Dynamics and Convective Heat Transfer in Impinging Jets Through Implementation of A High Resolution Liquid Crystal Technique, Part II, Navier Stokes Computation of Impulsively Started Heat Transfer Experiments," (with Kim) International Journal of Turbo&Jet Engines, Vol.12, pp.13-19, June 1995.

---

von Karman Institute Lecture Series VKI-LS 1996-09

Temperature Measurements, April 1996

"Introduction to Liquid Crystal Thermography, von Karman Institute Lecture series on Temperature Measurements , VKI-LS-1996-09, April 1996

"Color Recognition for Temperature Measurements on Liquid Crystal Coated Surfaces, von Karman Institute Lecture series on Temperature Measurements , VKI-LS-1996-09, April 1996

"Liquid Crystal Based Temperature and Heat Transfer Measurements Using A Transient Method (Test Case : Impinging Round Jet) , von Karman Institute Lecture series on Temperature Measurements , VKI-LS-1996-09, April 1996

"Liquid Crystal Based Temperature And Transient Heat Transfer Measurements On Highly Curved Surfaces , von Karman Institute Lecture series on Temperature Measurements , VKI-LS-1996-09, April 1996

"Steady State Liquid Crystal Thermography and Heat Transfer Measurements on Surfaces with Arbitrarily Specified Boundaries, von Karman Institute Lecture series on Temperature Measurements , VKI-LS-1996-09, April 1996

"Liquid Crystal Thermography on the Fluid Solid Interface of Rotating Systems, von Karman Institute Lecture series on Temperature Measurements , VKI-LS-1996-09, April 1996

---

"Validation of an Analytical Model for an Unsteady Planar Jet with Self Sustained Oscillations via Measurements from an Efficient Hot Wire Technique," (with Frank Herr), presented at the 25 th AIAA Fluid Dynamics Conference, AIAA paper 94-2205, Colorado, June 1994.

"Turbulent Transport in a Planar Jet with Self-sustained Deterministic Oscillations, " (with Frank Herr), 1994 ASME Winter Annual Meeting, International Symposium on Unsteady Flows in Aero-propulsion, ASME bound volume AD.40, pp.175-188 , Chicago, November 1994.

"The Effects of a Boundary Layer Fence on the Aerodynamic Flow field and Endwall Heat Transfer in a 90 o Turning Square Duct," (with Dean Rizzo), 1994 ASME Winter Annual Meeting, Session : Heat Transfer in Gas Turbines, ASME bound Volume HTD-300, Chicago, November 1994, pp.83-99.

"Passage Flow Structure and Its Influence on Endwall Heat Transfer in a 90 o Turbulent Duct Flow : Mean Flow and High Resolution Heat Transfer Experiments," (with B.Wiedner) ASME paper ASME-93-WA/HT-52, presented at the 1993 ASME Winter Annual Meeting, December 1993.

"Fluid Dynamics and Convective Heat Transfer in Impinging Jets Through Implementation of a High Resolution Liquid Crystal Technique," (with K.Kim and B.Wiedner), proceedings of the XI th International Symposium on Air Breathing Engines, held in Tokyo, September 1993.

"Implementation of a Finite Element Procedure, for the Optimization of Cooled Turbine Nozzles," a research report prepared for the Heat Transfer Division of Solar Turbines Inc./Caterpillar, San Diego, California, August 1993.

"Accurate Determination of Local Heat Flux on Steady State Heat Transfer Surfaces with Arbitrarily Specified External and Internal Boundaries," (with B.Wiedner) presented at the 1993 National Heat Transfer Congress, ASME bound volume HTD-Vol.242, pp 21:31, Atlanta, Georgia, August 1993.

"Miniature Laser Doppler Anemometers Using Solid State Laser Diodes," (with C. McLean) presented at the SPIE International Symposium on Lasers, Sensors, Applications, Session : Solid State Lasers IV, Proceedings of the SPIE, Volume 1864 ,16-23 Jan. 1993, LA.

"Evaluation of a Hue Capturing Based Transient Liquid Crystal Method for High Resolution Mapping of Convective Heat Transfer on Curved Surfaces," (with Hippensteele and Poinsatte) ASME Journal of Heat Transfer, Vol.115, No.2, May 1993.

"A Miniature Laser Diode Based Laser Doppler Anemometer for Turbomachinery Flow Measurements," (with C.McLean) Proceedings of the International Symposium on Heat Transfer in Gas Turbine Engines, Int. Centre for Heat and Mass Transfer, Athens, Greece, August 1992.

"Mean Flow/Heat Transfer Similarity and Character of Free Stream Turbulence in a Hot Turbine Cascade," a research report prepared for the Heat Transfer Division of Solar Turbines Inc./Caterpillar, San Diego, California, August 1992.

"A Low Speed, Transient Facility for Propulsion Heat Transfer Studies," (with B.Wiedner) Proceedings of the International Symposium on Heat Transfer in Gas Turbine Engines, Int. Centre for Heat and Mass Transfer, Athens, Greece, August 1992.

"Investigation of Three Dimensional Flow Field in a Turbine Including Rotor/Stator Interaction Part I:Design Development and Performance of the Research Facility," (with B.Lakshminarayana I.Halliwell and M.Zaccaria) AIAA paper 92-3326, presented at the ASME-AIAA Joint Propulsion Conference, Nashville, Tennessee, July 1992.

"A New Hue Capturing Technique for the Quantitative Interpretation of liquid Crystal Images Used in Convective Heat Transfer Studies," (With Kim and Hippensteele) ASME Journal of Turbomachinery, October 1992, vol.114, No.4, pp.765-775.

"Convection Heat Transfer at the Curved Bottom Surface of a Square to Rectangular Transition Duct Using a New Hue Capturing Based Liquid Crystal Technique," (with K.Kim, S.A.Hippensteele and P.E.Poinsatte), presented at the 1991 ASME Winter Annual Meeting, Atlanta, Georgia, December 1991, in the "Fundamental Experimental Measurements in Heat Transfer", ASME bound volume HTD-Vol.179 , edited by: D.E.Beasley and J.L.S.Chen, pp. 7-22.

"Effect of Incidence on Wall Heating Rates and Aerodynamics on a Film Cooled Transonic Turbine Blade," (with T.Arts), ASME Journal of Turbomachinery, Vol.113, No.3, pp.493-501, July 1991.

"Penn State Axial Flow Turbine Research Facility: Design Fabrication and Performance, PSU Turbo 9101, (with B. Lakshminarayana, I. Halliwell and M. Zaccaria), January 1991.

"An Experimental Convective Heat Transfer Investigation Around a Film Cooled Gas Turbine Blade," (with T. Arts), ASME Journal of Turbomachinery, July 1990, Vol. 112, No.3, pp.497-503.

"A technical report describing a new facility and proposed work on Axial Flow Turbine Research Facility and Broad Outline of Proposed Research", PSU Department of Aerospace Engineering, February 1989.

---

"Toward Improved Prediction of Heat Transfer on Turbine Blades, (paper using Camci&Arts VKI data (from Medic&Durbin) Asme Transactions, Journal of Turbomachinery, pp.187-192, April 2002,

---

"Toward Improved Film Cooling Prediction, (paper using Camci&Arts VKI data (from Medic&Durbin) Asme Transactions, Journal of Turbomachinery, pp.193-199, April 2002,

---

"A Convective Heat Transfer Study on the Strongly Concave Surface of a Film Cooled Turbine Rotor Blade," (with T.Arts) Proceedings of the 9th AIAA-ISABE Symposium on Air Breathing Engines, Athens, Greece, pp.427-438, September 1989.

"An Experimental and Numerical Investigation of Near Cooling Hole Heat Fluxes on a Film Cooled Turbine Blade," ASME Journal of Turbomachinery, Jan. 1989, Vol. 111, No. 1, pp. 63-70.

A comprehensive technical report describing a new facility and proposed work on "Multi-Stage Compressor Facility and Broad Outline of Proposed Research", a new research rig, PSU Aerospace Engineering Department, December 1988.

"A Feasibility Study for the Aerodynamics of an Annular Diffuser (Compressor Tail Cone) to be Used in the New 5m Diameter European Cryogenic Wind Tunnel," Research Report to the Turbomachinery Department, Von Karman Institute, May 1986.

"Ph.D. Thesis, Von Karman Institute for Fluid Dynamics and K. University of Leuven, Belgium, May 1985,

"Short Duration Measurements and Numerical Simulation of Heat Transfer Along the Suction Side of a Gas Turbine Rotor Blade,"(with T.Arts), ASME Journal of Engineering for Gas Turbines and Power, Oct. 1985, Vol. 107, No. 4, pp. 991-997.

"Experimental Heat Transfer Investigation Around the Film Cooled Leading Edge of a High Pressure Gas Turbine Rotor Blade,"(with T.Arts), ASME Journal of Engineering for Gas Turbines and Power, Oct.1985,Vol.107,No.4,pp. 1016-1021.

"Experimental Convective Heat Transfer Investigation Around a Film Cooled High Pressure Turbine Blade," presented at 7th AIAA-ISABE Symposium on Air Breathing Engines, Beijing, China, September 1985.

"Adiabatic Film Cooling Effectiveness from Heat Transfer Measurements in Compressible, Variable-Property Flow,"(with P. M. Ligrani), ASME Journal of Heat Transfer, Vol. 107, No. 2, May 1985, pp. 313-320.

"Short Duration Heat Transfer Measurements "a book chapter in Measurement Techniques in Turbomachines" Von Karman Institute Lecture Series 1985-03, February 1985, (with Arts)

"Thin Film Heat Transfer Gauge Construction and Measurement Details," (with P. M. Ligrani and M. S. Grady) Von Karman Institute Technical Memorandum 33, November 1982.

"An Experimental Investigation of a Centrifugal Compressor Inlet Optimization," (with F. A. E. Breugelmans and P. M. Ligrani), A research report to the Turbomachinery Department, Von Karman Institute, April 1982.

"Investigation of Heat Transfer Rates on a Film Cooled Flat Plate with an without a Pressure Gradient," (with P. M. Ligrani and N. Hay) Von Karman Institute Internal Note 68, July 1981.

"An Investigation of Endwall Heating Rates in a Turbine Passage (with A. Ongoren and P.M.Ligrani), Von Karman Institute, PR-1981-17, July 1981,

"An Investigation of Endwall Heating Rates in a Turbine Passage," (with A. Ongoren), Von Karman Institute, PR-1981-17, July 1981.

BACK TO HOME PAGE