LEPAGE, ANDRES

e-mail address: lepage@psu.edu

 

Publications

 

-        Lepage, A. (1991).  “Evaluación de Métodos para el Diseño de Columnas Rectangulares de Concreto Armado en Flexión Biaxial,” Master of Science Thesis Submitted to the Universidad Simón Bolívar, Caracas, Venezuela, 178 pages.

 

-        Sozen, M. and Lepage, A. (1996). “Earthquake-Resistant Design in Regions of Moderate Seismicity,” Second International Symposium on Civil Infrastructure Systems, Hong Kong, China, 6 pages.

 

-        Lepage, A. (1996).  “Seismic Drift Estimates for RC Structures,” Eleventh World Conference on Earthquake Engineering, Acapulco, Mexico, 8 pages.

 

-        Lepage, A. (1996).  “A Method for Drift-Control in Earthquake-Resistant Design of RC Building Structures,” Ph.D. Thesis Submitted to the Graduate College of the University of Illinois, Urbana-Champaign, 251 pages.

 

-        Lepage, A. (1998).  “Nonlinear Drift of Multistory RC Structures during Earthquakes,” Sixth National Conference on Earthquake Engineering, Seattle, Washington, 12 pages.

 

-        Browning, J. and Lepage, A. (1999). “Discussion of Nonlinear Analyses of an Instrumented Structure Damaged in the 1994 Northridge Earthquake (by Li, Y.  and Jirsa, J. O.)”, Earthquake Spectra, Volume 15, No. 1, pp. 175-179.

 

-        Matamoros, A., Garcia, L., Browning, J. and Lepage, A. (2004).  “Flat-Rate Design Method for Low- and Medium-Rise RC Structures,” ACI Structural Journal, American Concrete Institute, Vol. 101, No. 4, pp. 435-446.

 

-        Lepage, A., Aschheim, M. and Senescu, R. (2004).  “Shear-Yielding Steel Outriggers for High-Rise Construction,” Thirteenth World Conference on Earthquake Engineering, Vancouver, Canada, 12 pages.

 

-        Lepage, A., Neuman, S., and Dragovich, J., (2006).  “Practical Modeling for Nonlinear Seismic Response of RC Wall Structures,” Eighth National Conference on Earthquake Engineering, San Francisco, California, 10 pages.

 

-        Warden, B., Browning, J., Matamoros, A., and Lepage, A., (2006).  “Correlating Nonlinear Response with Approximate Linear Analysis,” Eighth National Conference on Earthquake Engineering, San Francisco, California, 10 pages.

 

-        Boggs, D., and Lepage A. (2006). “Wind Tunnel Methods,” SP-240 CD Performance-Based Design of Concrete Buildings for Wind Loads.  Special Publication sponsored by ACI Committee 375, Farmington Hills, MI., pp. 125-142.

 

-        Ghosh, S.K., Bracci, J.M., Caldarone, M.A., Harman, D.K., Jansen, D.C., Matamoros, A., Taylor, A.W., Kelly, D.J., Lepage, A. and Russell, H.G. (2007).  “Specification for High-Strength Concrete in Moderate to High Seismic Applications (ACI ITG 4.1-07),” ACI Innovation Task Group 4 and Other Contributors. Farmington Hills, MI., 10 pages.

 

-        Ghosh, S.K., Bracci, J.M., Caldarone, M.A., Harman, D.K., Jansen, D.C., Matamoros, A., Taylor, A.W., Kelly, D.J., Lepage, A. and Russell, H.G. (2007). “Materials and Quality Considerations for High-Strength Concrete in Moderate to High Seismic Applications (ACI ITG 4.2-07),” ACI Innovation Task Group 4 and Other Contributors.  Farmington Hills, MI., 26 pages.

 

-        Ghosh, S.K., Bracci, J.M., Caldarone, M.A., Harman, D.K., Jansen, D.C., Matamoros, A., Taylor, A.W., Kelly, D.J., Lepage, A., and Russell, H.G. (2007). “Structural Design and Detailing for High-Strength Concrete in Moderate to High Seismic Applications,” (ACI ITG 4.3-07),” ACI Innovation Task Group 4 and Other Contributors.  Farmington Hills, MI., 202 pages.

 

-        Hueste, M., Browning J., Lepage A., and Wallace, J. (2007).  “Seismic Design Criteria for Slab-Column Connections,” ACI Structural Journal, V. 104, No. 4, July-August, pp. 448-458.